Thread: Team Tekin Q&A
View Single Post
  #1496  
Old 21-03-2013
Randy p's Avatar
Randy p Randy p is offline
Member
 
Join Date: Oct 2006
Location: Nevada, US
Posts: 298
Send a message via Yahoo to Randy p
Default

Quote:
Originally Posted by jo90 View Post
Hi guys, hope someone can help here. I have posted on the Durango thread but thought i'd also pose this here as maybe another Tekin owner might shed some light.

Running a Tekin RS with a SpeedPassion V3.0 6.5t motor. Geared at 22/87t (48dp). Speedo set to Dual mode, 5 timing, profile C1 (which is identical to profile 3) current limit 40 and the motors physical timing fully retarded.

Im finding the speedo is almost at thermal. Run's fine at the start of a run but by around the 3 minutes it begins to cog as the speedo gets to hot. At points the speedo seems to freeze, then after a few seconds comes back to life.

I believe the RS can handle down to a 5.5 motor limit so ideally it should be able to handle this motor. Have I done something wrong here or set something incorrect though for it to get so hot ?

Any help would be appreciated. I do have an RSPro in my 2wd so may well swap this into the 4wd where im having this issue.

Cheers

John
The RS is only rated to a 7.5. You're going to need an RS Pro in 4wd.
__________________
Tekin Team Manager
Reply With Quote