Quote:
Originally Posted by welshmerlin
We had this same problem with a Pro and a LRP X20 7.5 however our motor was getting very hot. Reduced timing from 22.5 to 11.25 and all was OK again. Didn't have this problem with a X12 7.5 with the same settings! I have read that this speedo and LRP motors don't play well together. Some are cutting the 2nd wire (don't know which one) to solve the shut down problem. Hope that helps
|
i think its 2nd from the left as you look at the motor should say few pages back also you can pull the terminal out of the plug dont cut it
also have you turned off your lipo cut off ? as it might be when its drawing large current the esc is askng to much of ur lipos ? this has happened to me alot on different esc