Quote:
Originally Posted by RichieZXR
Hey folks I am ready to blow my brains out..... I have a revention Pro running it previously on a 6.5 and now a 5.5 V3 the speedo was fine for about four weeks however now I am getting 3/4 of a heat and the speedo seems to be going into lamp mode (flat LiPo) I hav.e used other racers batteries to rule it out and it still happens, the setup is fitted to my dex410, my servo is a high speed alturn and the speedo is running the modify2 software.
It's been a very frustrating night as on a number of occasions I have been running quick in my heat
I don't believe I am running the thermal cut off but need to check.
When the car goes into limp mode if the marshal turns the speedo off and on again, its fine.... The motor and esc do not even feel hot.
For what I paid I am somewhat disappointed ! I tried to go on the sp site for help but it re directs me to schumacher
I am sick as a chip, can anyone help ?
Cheers
Richie
|
We had this same problem with a Pro and a LRP X20 7.5 however our motor
was getting very hot. Reduced timing from 22.5 to 11.25 and all was OK again. Didn't have this problem with a X12 7.5 with the same settings! I have read that this speedo and LRP motors don't play well together. Some are cutting the 2nd wire (don't know which one) to solve the shut down problem. Hope that helps