Quote:
Originally Posted by DanB4
Thanks for the reply!
Well they aren't really up to speed with qualifiers and finals yet, they just get together and giggle to each other whilst boasting who has the highest kV motor and largest capacity LiPo.....oh and if you can get a 4WD to wheelie into a corner (forgetting actually steering round the corner) then that seems to be a bonus   
Anyway, sarcasm aside - I'm hoping to introduce 5 minute heats and finals but at the moment it's just stick the car on track and thrash around trying to beat everyone else for as long as the LiPo lasts - they all seem to just drive until the low voltage cutoff activates (ouch).....
I want to teach them a lesson! Slaughtered them all in 1/10th electric on road so plan to do the same in 1/8th!
How about an HPI Trophy Flux buggy or truggy?
Problem with RTR is that I'll want to use my own stick TX with Spektrum module and they all seem to come with wheel TX's.
I have several 2S LiPo's from my touring cars so guess I can just hook them up in series to make 4S.
Cheers,
Dan |
i am not to sure on the HPI range so i can nto comment on that sorry.
then if that is the case.... something in the 2200kv range and a good old 150 amp esc from hobbywing. that will get you at least 18 min on 5500 40c
yeah.. run the lipos in series and then get it working as a 4s just make sure you connect it all up correctly.
if they are not going to bother with long finals you can get a 2650 motor and anything over a 5400 40c rating motor and you should get 15 to 16 min run times if you want to get or do who has the biggest D1.k
LOL
post up more if you are nto sure.