Lots of new GHEA parts in this week.
First up is piston kits for the Kyosho Rb6 and the AE and TLR big bore shocks.
Kyosho Pack Rack 12mm pistons kit.
The rack includes 2,3,4,5,and 6 hole pistons which are oil weight balanced. (
5 sets of 4 pistons)
(Tested by
David Ronnefalk and
Christoffer Svensson during this indoor season with great success)
Link:
http://p-dubracing.co.uk/index.php?m...roducts_id=285
AE & TLR Pack Rack 12mm piston kit
The rack includes 2,3,4,5,and 6 hole pistons which are oil weight balanced. (
5 sets of 4 pistons)
Link:
http://p-dubracing.co.uk/index.php?m...roducts_id=285
So with both kits you can change just the piston to change the pack in the shocks.
Again for the Kyosho Rb6 and any car running the B4 front end, are brass and aluminium bulkheads.
For the RB6
Aluminum bulkhead, 10 grams, turnable between 25 and 30 degrees. M3 screws for tightening the hinge-pin.
Link:
http://p-dubracing.co.uk/index.php?m...roducts_id=282
Brass bulkhead, 30 grams, turnable between 25 and 30 degrees.
M3 screws for tightening the hinge-pin.
Link:
http://p-dubracing.co.uk/index.php?m...roducts_id=281
For the B4 front end.
Aluminium bulkhead, 5-40 socket head screws, 5-40 set screws and delrin front brace, 15 grams.
Link:
http://p-dubracing.co.uk/index.php?m...roducts_id=283
Other items back in stock.
Losi 22 pistons
MP9 outer hinge pins
Full details of all products on
www.p-dubracing.co.uk
MiCk B. :-)