[Steven Forster]

Originally Posted by declan46

Hii, the servo is brand new it's been used twice its a Alturn USA Low Profile Digital Servo BB/MG (High Speed)??

And is there anyone i can talk to or websites for diff parts and ansmann bit's?.

Also my slippers set with a 3mm gap from the spring to adjuster just like the manual say's, i know they can be wrong but i don't know any other way to set the slipper

Declan

Originally Posted by Andyp

Mmm I'm not sure on that servo as I have never used one, maybe your horn could be slipping on the splines on the servo? Have you by mistake put the wrong horn on? A 25 spline horn on a 24 spline servo for example would kind of work but it would slip round. Just an idea?

Ansmann parts are abit tricky as they stopped bringing them into the uk but then another company took over so I assume they are still available but where I'm not sure?

Try SMD (spire model distribution) they bring Team C cars into the uk, I'm not sure of the politics of it all but Ansmann cars are rebadged Team C cars.so most parts should be compatible.

Here are the kyosho gears that I believe will fit

http://www.jemodels.com/electric-mod...tegory_id=1285

Generally what the manual tells you won't be a million miles away on the slipper clutch but obviously the is tolerance in the parts, track conditions differ and what motors are being used cannot all be covered, I should be there on Sunday, I run a kyosho lazer that is a similar car to what you have so I can tak a look for you, but most reasonably experienced racers should be able to help also

Is this the servo you have declan ???

http://www.servoshop.co.uk/index.php...5MG&area=Servo