Try this out
Front suspension
Toe +1
Ride height 19mm
Camber -1 deg
Caster 5deg
Kick angle 25deg
Sway bar no
Oil 27.5
Piston 55
Spring blue my be one softer
Spindle type trailing
Shock limiters 2mm
Shock location 2 on tower outside on arm
Bump steer no spacers
Camber link 2 with no spacers
Rear suspension
Toe 4 deg
Anti squat 2 deg
Roll centre lrc
Ride height 20mm
Camber 2 deg
Rear hub spacing middle
Hex width stock
Sway bar no
Oil 25
Piston 55
Spring yellow
Shock limiters no
Camber link 1 with 1mm under and E with 1mm under
Shock location 2 on tower/ outside on arm
Battery saddle
If you can get hold of a cream waght that would help a lot our put about 40g of lead just in front of motor underneath the brace
Make shour you are running the same tyres as most the peaple at your track
Please give it a go and let me now if its any better
|