Quote:
Originally Posted by losichris
Im struggling to remove a stripped screw on the bottom on my SX3.
The screw is completely rounded off and no way any driver will work.
The screw is very countersunk into the chassis, so dremelling will require a very fine and small blade, and im not sure where to purchase
Any ideas?
|
I've done the dremel method a few times, using a fine/thin sandstone cutoff disc (a number of which are included with any dremel) - and then I later repair the two small knotches/grooves I've cut into the plate with JBWeld or similar metal-repairing type of epoxy. Works like a charm.