Quote:
Originally Posted by Jimbob2911
Evening,
Just starting out with electric cars. Just finished building b44.1 with speed passion pro and 7.5 turn speed passion sensored motor.
Everything seems to work ok but the speed controller red and orange light start solid but once I accelerate once the red light just constantly flashes. The orange stays solid.
I am running lipo 2s 5100mah which are fully charged. The book says red flashing light means low voltage but doesn't seem like it is this due to fully charged battery.
Any ideas?
Thanks James
|
Quote:
Originally Posted by Jimbob2911
Still the same.
Have emailed speed passion to see what they say.
Has anyone else got any ideas?
Thanks
James
|
I have the same thing happen every time I go to reset mine.
I forget one of the steps.
Go to page 3 of the user manual,
and when you go to set the calibration settings (neutral, full throttle, full brake) you have to press the little red "reset button" on the ON/OFF switch
each time (3 total).
If you don't, then the ESC will just flash red.