[snowmiu19]

Originally Posted by hloland

You can use a 1,5mm shim on the "BEVEL GEAR" axel. Then the mid shaft will fit the ot-5 better. I use a shim like this:
http://www.team-durango.com/part-inf...artNo=TD712003
You have to grind the end of the "BEVEL GEAR" axel for the OT-5 set screw.

Attachment 49496

Thanks for the reply. Your shaft fits ot-5 without and slop or loose play?

By shimming the bevel gear axle i will move the ot5 joint outter right?

Regards
Calvin