Well after 2 full dyas of testing I have come up with the following setup for med-high bite clay tracks, we have very tight technical sections mixed with a triple that spreads about 25'. This is the best setup so far with the fastest lap timed and great consistentcy.
Front
camber 3 - C 2 #4 AE washers under the ballstud
steering - stock rack with one #4 washer on the spindle
MLP - narrow
Shocks - 3-hole pistons 57's 30wt losi black academy springs
shock at middle hole in arm, middle in tower
27.5 aluminum caster kickup, stock droop (just below level)
Rear
3 degree's of anti-squat (AE .030 washer under front holder)
camber 2 - B no washers
shocks unscrewed 1 turn, 3-hole 56's 20wt losi white academy springs
shocks mounted outside in arm and #3 in tower
MLP narrow
Novak 7.5 'lite' geared 80/23 GTB 4-coast brake stock rest
Protek 4000 lipo + 1mm stainlessplate for weight (weighs 4.5oz.)
Run the slipper as tight as traction will allow, tons of forward bite
AE wheels F/R- Pink Tapers, Pink 3 rib prescrubs bomb 1 foams...flame and sauce with zip free
Jumps excellent!!!!, very predictable on/off throttle. Lovin it
__________________
Schumacher - Core RC- Klinik RC- Tekin - Avid
|