You can use a 1,5mm shim on the "BEVEL GEAR" axel. Then the mid shaft will fit the ot-5 better. I use a shim like this:
http://www.team-durango.com/part-inf...artNo=TD712003
You have to grind the end of the "BEVEL GEAR" axel for the OT-5 set screw.
bilde.JPG
__________________
DEX 210, 410 and 410Ultra
Kyosho Lazer FS2 SP
Ultima RB5 SP2 WE and Vega SP2
Ultima SC-R and DESC 410R
BOMBK
Norway
|