Quote:
Originally Posted by coleman758
I'm in the middle of fitting them to mine,
You will need KYOSHO OT-5 joints, These will go on the input shaft.
You will also need a bucket load of shims.
You will need to shim the diff side to side, and the input shaft so they mesh correctly.
Im starting on 7,000K Front 3,000K Rear.
I also run a 410, Alot of people ive spoken to are running same oils front & back. But this will come with testing.
M
|
Im facing problems with the shaft, i have installed the OT-5 as in this picture.
Mounted on:
Alot of freeplay and loose:
Front side fitting is all right:
Is there a drive shaft shoe i can attach so it can go in?
But it wobbles. Can someone let me know how i can solve this. the Diff side to side shimming is perfect now and it meshes fine. Check out the video below. Hope someone can help me
Thanks
http://youtu.be/CW22-kwtKjE