My mardave carbon is spot on also, our club racers on gt carpet, my set up is, 50 sh fronts 46mm, medium springs, 2.5mm caster, wishbones straight onto the chassis, rear end, 50k in damper tube, 40 sh rears 48mm, medium springs, 1.5mm droop. Small bit on sponge under the front corners of the bottom plate, ride heights, 4 mm all round, on the photo above you need to put wheel on the car then put it on a flat board is wind the nuts up to give you a droop, you need the weight on the sprins to set it. For me I wouldn't have the blue washers at th rear, think it might bind up when cornering fast, I use cs high gripper 20 mins on wheels, full rear, just over 3/4 fronts, I've going to use 2/3 sets of wheels Per night as they tent to get claggy and to grippy, ascari shell, tried the Aston Martin shell last night, go very well the wings about 1" up on posts, wights cut down to around 12-15mm ( of the top of my head )
Hope this helps...
