if u really don't beleive me try this.....
remove the front block and all shims, then sit the box in position on the chassis. The gap between the box mount and rear block will be 3mm.
what's gonna happen if you bolt the box down? The chassis is going to bend around the box bottom as it gets pulled into that 3mm gap. This has the effect of raising the rear block and reducing the antisquat.
so that gap must be filled with a 3mm at all times.
the same goes for the front block but because you are raising this, you adjust the shim size on top to fill the gap.
__________________
Stephen Smith
Answer RC Team
HB Racing | Team Orion | Xpert | Racing Experience
|