Quote:
Originally Posted by Getpip
It's not as complicated as that.
The shims are marked 0, 1 and 2. (And come in pairs, one of each shape)
Whatever size shim you use on top of the rear block use the corresponding size shim under the front block. (Not on top) This keeps the total height of front and rear blocks the same.
If you do this the gearbox will remain level but the hinge pin angle (anti squat) will change.
Give it a try.
|
i think ill find it is. I thought as u say at first but it causes the chassis to bend.
the idea is to keep the gearbox the same height, not just level