Currently on my 8th meeting on both polished wood and astro...
On polished wood im running the shocks as follows
Front - Middle on tower inside on arms 30wt (3 hole piston)
Rear - Middle on tower inside on arms 25wt (3 hole piston)
kit roll bars on both front and rear
front link short and up on tower
rear link long and down on tower
roll centre - outside hole on arms
rear inserts 0 all round
+.75 hubs on rear
10k front diff 5k rear diff
no limiters in the shocks (full droop)
Flex - Full flex no screws
dBoots nanobyte B compound with dBoots medium inserts
This is my current set up and it is quite aggressive where i have my D/R down to around 85% but works well on loose or low grip surfaces...
|