Quote:
Originally Posted by x313
The two spacers are probably from the top deck, they go between that and the rear gearbox casing.
Normally the height difference would be from the incorrect shock caps bring fitted, the two types do look very similar, either that or the o ring seal in the top of the shock being on the wrong side of the shock top. (It should be under the top so it's flush with the top of the shock)
The car looks familiar.. If its Neil's old one it was well looked after so may have just got a rogue part fitted.
The alloy wishbone holders do come loose, some weak patch lock will do the trick..
|
Just checked the top deck,its sitting parallel with the battery's and straight
I did check the shock caps, the plastic top looks tone sitting in the Ali cap Ok.
I thought that may be the case with the holder,ill keep an eye on it.
Quote:
Originally Posted by x313
Oh and check the top mounting screws are straight and the shocks have an equal amount of thread showing.
|
Yeap there straight