Quote:
Originally Posted by mikeyscott
Measure shock bodies, should be 38mm
Also there are different rear wishbones avaliable, so take off and check the same.
I find the correct ones have a little M on the outside near where the hub mounts
I'll have a look at mine.
RE diagrams, I'll have a look through my mailbox, but if you email [email protected] I'm sure he'll send them over and provide assistance. |
I did measure the bodies, there both around 38 mm, I has read no one of the threads that some one mentioned there are different sizes so I checked.
Just checked that the arms have an "M" by the hub and they have
.
Cool would be good if you've got some diagrams,if not ill email Tony.
Cheers
Ross