Quote:
Originally Posted by alcyon
i tried using the ZX plate, but i only have one for my ZX. so i now use the plate that came with my A&L steering set. its graphite and fits nicely. I will get some pics soon. in order to clear the mids gearbox you will have to play with the bellcrank height, not only that, you will have to find the right height so that bumpsteer is kept to a minimum i used the spacers that came with the 39655 set. you also have to mount the connecting rod from the servo to the bellcrank underneath becuase if you put it on top you cant mount the topdeck.
|
Some pics would be great. I have an A&L steering set for my SWB Mid build.
I have a standard ZX plate that I put a recess into so that it would clear the mid gearbox with ZX bellcranks when I test fitted but at the time I didn't realise that the 39655 bellcranks are a different height.
You can see the mod I did to the ZX plate in the pic below against a standard one.
