My car is Mid motor, running shorty lipo (turnigy nano 4200mah battery) Savox 1251 servo. ESC hobbywing 60a sd on top of battery. running speed passion 8.5t. standard body, with rear kit wing cut 2 'notches' running minipin rear (yellow), cut stagger front(yellow)
Kit spring (yellow rear, red front), kit oil weight.
This setup is my own, never copied anyone setup.
Front end.
0 degrees castor, 0 shim on #1 inside on camber link 2mm on castor block, 0 bump steer. 20 kick up block -1 camber, 1 degrees toe out. top shock middle, bottom, outside. 18mm ish ride height... no toe changes across the travel range.
Rear, 2mm shim on #2 inside, 0/b on hub, TLR 50g weight in rear. every else is kit setup. shock middle tower, outside on bottom. shock has 2mm spacer at bottom to push the shock out to make it more vertical rather than angle. 20mm ish rear ride height.
i find the steering isnt sharp as other, it does turn in very well. but not as quick as others cars like team C, X2c, SV2 etc... i got 150% epa on my dx2s
So thought about adding weight to give it "more grip/weight" at low/high speed.
|