There are only 2 issues i have found with the car.
1 - the shocks shafts are too short, and do not allow for much, if any droop when using the outer holes on the arms. Unfortunately the shafts are 3.5mm thick, so shumacher ones wont work in place. I will be trying to source longer 3.5mm shocks. In the meantime just unwind the shock end a few turns to gain a couple of mm.
2 - The rear suspension blocks and not screwed onto the chassis. When you remove the gearbox to do diff etc, the blocks are loose, so you end up with the arms, hinge pins and balls falling off. Will be looking at a way to fix these to chassis.
On the plus side, i got mine sorted today
