reply from Schumacher
Hello all,
Trish from schumacher gave me a reply, he told me : to file the edges of the carbon fibre faces which touch the front and rear transmission housings. The amount you need to file off is very small. I would also back off all of your screws under the chassis and assemble your top deck and then tighten the under chassis screws a star formation and then you should have more slack and again after running it you will find it will loosen up over a couple of runs.
I did just that and it helped, I wouldn't consider it a loose belt but it gave me
a little bit of slack. Very swift reply from Schumacher as usual.
Confident that it will get looser after I've run it a few times.
For that the weather needs to clear up for a lack of decent indoor off-road
venues in Holland........
Greetings
Hans
|