Quote:
Originally Posted by f888fhw
Using 0.7mm washers the following can be achieved with the new front end:
Front 1, Inner 0 = 1.58 castor 0.91 camber
Front 2, Inner 0 = 3.15 castor 1.82 camber
Front 2, Inner 1 = 3.15 castor 0 camber
Front 3, Inner 0 = 3.15 castor 2.7 camber
Front 3, Inner 1 = 4.72 castor 1.92 camber
Front 3, Inner 2 = 4.72 castor 0.91 camber
|
Logically I would expect Front 3, Inner 0 = 3.15 castor 2.7 camber to be
Front 3, Inner 0 = 4.72 castor 2.7 camber