Here is my 7.5 setup, nothing special really :
Running mode : 1 (Fwd/brk)
Drag brake : 0
Low voltage cutoff : 3.2V/cell
Punch : 3
Brake force : 87.5% (Epa between 85% and 100%)
Reverse force : not revelant
Initial brake force : 0
Neutral range : narrow
Overheat protection : enabled
Boost : 10
Boost start : 5000
Boost timing : n/a
Turbo timing : 10 (15 for a long straight, 0 if slippery)
Slope : 12°/s
Turbo delay : 0.4
I'm using the latest mod software, ratio is 78/24 = 8.45
Stock timing on the motor endbell.
I tried using a bigger pinion (26) with less boost (8), power delivery is smoother but I lack some punch.
HTH
|