[slow coach]

Has anyone tried these servos for 8th Rally X or other classes

Servo HGM SST BB, MG
Servo HGM SOR BB, MG

the spec looks quite good on them but just wondered about reliability

SST
Specification
Holding torque 6.0V, approx.: 200 N/cm
Transit speed at 6.0 V, approx. : 0,06 Sek/40°
All-up weight, approx.: 58 g
Angular travel incl. trim, approx. : 2 x 45 °
Transit speed at 7.4V, approx. : 0,05 Sek/40°
No-load current drain, approx. : 35 mA
Torque at 6.0V, approx.: 90 N/cm
Holding torque 7.4V, approx.: 220 N/cm
Charging rate at 6.0V approx.: 2430 mA
Dimensions (LxWxH): 40 x 19,5 x 40 mm
Torque at 7.4V, approx. : 105 N/cm
Bearings: Lager bb2x
Replacement gearbox: 94051.2
Charging rate of 7.4V approx.: 2980 mA
Gear unit: Getriebe mg
Operating voltage : 4,8 ... 8,4 V
Neutralimpuls: 1,5 ms
Max. Ansteuerfrequenz: 2,5 / 400 ms / Hz



SOR
Specification
Holding torque 6.0V, approx.: 220 N/cm
Transit speed at 6.0 V, approx. : 0,075 Sek/40°
All-up weight, approx.: 67 g
Angular travel incl. trim, approx. : 2 x 45 °
Transit speed at 7.4V, approx. : 0,06 Sek/40°
No-load current drain, approx. : 37 mA
Torque at 6.0V, approx.: 105 N/cm
Holding torque 7.4V, approx.: 255 N/cm
Charging rate at 6.0V approx.: 2320 mA
Dimensions (LxWxH): 40 x 20 x 40,5 mm
Torque at 7.4V, approx. : 125 N/cm
Bearings: Lager bb2x
Replacement gearbox: 94052.2
Charging rate of 7.4V approx.: 2930 mA
Gear unit: Getriebe mg
Operating voltage : 4,8 ... 8,4 V
Neutralimpuls: 1,5 ms
Max. Ansteuerfrequenz: 2,5 / 400 ms / Hz