Quote:
Originally Posted by knighthawk
I've been reading the Speed Passion threads on the RCTech Forum !
There's a lot a chat about the S and R ESC's and the low BEC output.
It seems to be causing a few problems with high output servos like Savox.
Also I seem to remember reading about the LED card's values being mixed up, think it was values 4 and 5 were around the wrong way. The advice seems to be get the Reventon LCD Card as you can see what you are changing as it tell you on screen, the LED just shows the number !
Also seem to remember reading that 99% of drivers are turning off both the Lipo and Thermal cutoffs Off !!
|
cheers for your help mate
, one of the settings that was wrong was the thermal cut off , ( its meant to have 2 choices , and it went up to 9 !! ) , i had it on ( what i thought it was ) 95c and the lipo cut off was on 3.2v
is it only meant to be on the s and r's then ? ..
the only thing i remember , was my servo going really slow , when the esc got warm !! , now its cooled down its all working ok , just wish i could put the 119mod software on it , as that was what i was running on my old esc