Quote:
Originally Posted by shaun m
how are people getting on with there reventon r esc's now then ??
Ive used mine for the first time in my cat sx3 with novac ss 5.5t , ace ds 1015 servo , and to be tottaly honest im not pleased with it 
I tried loading the 119mod software using my 2in1 lcd program box , and that wont work , soo then installed the stock01 software on it ..
had it on the same gearing /track , and the esc is getting really hot , also was playing about with the esc settings , to try and cool it down to no avail !!
and the other thing im dissapointed with, when going thro the esc setting using the led program card , some of the values are not revelant to the things your trying to change !! and as said above , would had been nice to be able to use the lcd box ( as you know what settings your changing ) and to upload to older software ...
soo very dissapoined  and will have to splash out for another esc ... rant over !!  |
I've been reading the Speed Passion threads on the RCTech Forum !
There's a lot a chat about the S and R ESC's and the low BEC output.
It seems to be causing a few problems with high output servos like Savox.
Also I seem to remember reading about the LED card's values being mixed up, think it was values 4 and 5 were around the wrong way. The advice seems to be get the Reventon LCD Card as you can see what you are changing as it tell you on screen, the LED just shows the number !
Also seem to remember reading that 99% of drivers are turning off both the Lipo and Thermal cutoffs Off !!