Quote:
Originally Posted by Jesse James
Ok, many thanks for your help up to now.
I have acquired an Answer RC Servo Horn as suggested, fitted and all seems to be fine.
Moving onto Motor and ESC timing setting.........
I have fitted a Speedpassion 7.5T brushless motor and ESC but not sure what to do when setting the motor timing via the program card?
There seems to be lots of options on the ESC program card ranging from 0deg upwards with some options stating >=10.5T etc. etc. On the end of the motor there are also markings showing 0deg and +10deg and looking just under the +10deg I can see a figure '0'.
Confused as to what this means and what is the relation between the figure showing on the motor and the chosen setting via program card?
|
I suggest if your doing your racing at ribble I would leave all your esc settings on default as that should be fine on a 7.5 in a 2wd on that track
