Quote:
Originally Posted by Joe_K
Hi guys,Just bought a SupaStox and will be running it in 2S 21.5T.Just a few questions for those of you with more experience of these cars really.
1) I'll be running this on a fairly open track (30M straight). What rollout should I be looking at? 70-ish MMPR?
2) What sort of tyre diameters do you go for? Where do you start from? 51mm on the rear?
3) What tyre diameter split do you run rear to front? 2.5mm? 3.5mm?
4) What shells work? My current thinking is to go with the Ascari.
5) I've noticed that my steering blocks are a tight fit onto the metal steering posts. What were your solutions? Should I just file it out a little with a needle file or is there a better way?
Cheers folks, looking forward to seeing what these cars can do.Joe
|
hi joe i only run 1s 13.5 so not much help on that (get a 1s and 13.5 would be my recomendation) as you can then do nationals should you wish
1/ 13.5 im around 65 to 70
2/3 i started at 50mm rear with 2mm split and found that fine
4/ my club had no shell restriction so i run the touring car, but the ascari is good with the lotus seeming to be the "choice" however im not sure what was run at the recent national
5/ i had this on mine and found that if you slaken the nut that holds the king pin in the steering block it does not do it, theory was that as i tightend the nut the hex in the block twisted slightly distorting the plastic.