Quote:
Originally Posted by hotrodchris
For the motor to turn the wrong way more likely the wiring is reversed IMO
|
No, I'm 100% sure that's correct. My initial thought was:
The motor is on the opposite side compared to the B44 - which means it must be reversed.
But it's probably just the diffs, will find out tonight!
Thx for all the great help guys, forums like this are fantastic!
Quote:
Originally Posted by coleman758
I have all my cases bolted, I use a slightly longer screw that goes all the way through, Then an M3 nut on the top.
So screw fits both ways.
I use the bolts to hod the bearings better. I run the screw head up on the front to clear the front bulkhead, But screwhead down at the rear.
|
LOL! That's a new one!
I messed up real bad many years ago... indoor 1:12 track race. Put the car on the starting line... ready... go... full speed backwards into the pit... you don't scare the opposition with stunts like that