http://www.carbonmods.co.uk/
Buy some resin from above
Open up the delaminated bits a little
Brush some of the resin in as far as you can get it with a small art/kids paint brush ( you will hardly need any resins ) but make sure it doesn't run down any surfaces by working with the chassis from underneath ( so any overspill drips off without running down the rest of the chassis)
Clamp it with a piece of polycarbonate on the clamp jaws
Leave for 24hrs
File off the excess resin that has formed beads on the lower edge that we talked about earlier
Hey presto
Good as new