Quote:
Originally Posted by CrashBangWallop
If you put it on charge it should get to 8.4v. This is the maximum charge voltage, once you disconnect it from the charger the voltage may drop slightly to the nominal voltage which would be 7.4 volts for a 2 cell li-po.
|
That's not how it works at all!!
When the charge reaches 8.4v from the constant current (say 2A for that cell) then the current is cut back until the LiPo is full. When the charge is complete the LiPo should hold 8.4v with no voltage drop until a load is applied.