Quote:
Originally Posted by Jay Smith
I had a similar issue with my GT2.0 Pro. I wanted to gear it quite high, so I reduced the timing to try and keep the tempurature down and found that if you reduce the timing from the factory settings, the motor actually ran hotter!!! 
This was with an early version of firmware. I've now updated to the latest (1.38) with boost and turbo mode, and reducing the boost timing does make it run cooler as expected  |
Im still having issues with the motor running too hot and have also noticed that when charging my lipos they are putting in anywhere between 2000-3000mah's.................(the same motor and lipos ran ok in my B44 although using a losi esc at the time) !!!
Ive tried using a different motor which also ran hot as well.......
Ive resoldered all the wires using a better quality solder.......
Any advice on what settings to use, using the programme box ???
I dont actually know what version firmware i have on it but the esc is at least 2 years old.
cheers