[gazhillAE]

Originally Posted by julianb

Hi,

setup as follows for a wood and carpet track:-

Ride Height: 22mm

Springs: Green front and rear, (tried brown on front but a little too much steering).

Shock positions: Front, inner hole top. Rear, inner hole top, inner hole bottom.

Rear roll centre, second hole from top.

Oil: 35 front 27.5 rear

Pistons: can't remember!!!!

Tyres: Rear - DBoots ,Schumacher medium insert. Front - Schumacher Cut Stagger rib, no insert.

Caster: 30 degree.

Weights: 60g under lipo, 62g under servo. Under steering weight, brass front bulkhead, Ghea front weight.

Camber: Two degrees rear, one degree front.

Toe: Zero degree front. Three degree rear.

Motor SP 7.5, Nosram Pearl ESC, KO 2343 servo, KO 2.4 radio.

Shell: Standard C4.1 Centro

Rear wing: Standard, no Gurney flap.

This is by no means definitive, just where I arrived at after finding a setup that gave me a nice amount of grip and steering. The track was relatively flat, so a circuit with larger jumps and less grip (Worksop for instance), may well mean a rethink... Have to say that the improvement in consistency was a marked improvement over my previous chassis...


Cheers

Ju

Was this the 3.2 chassis or the one with the weights???
Sounds like the weights one...
How's it performing now?