[alex007]

Hello

I need a good carpet setup for my b4 +8mm not b4.1

I have b4.1 rear tower and b4.1 inboard toe-in adjustment.
all b4 factory team carbon exept b44 rear arms and hubs

Setup:
30 deg caster blocks
axle height located in middle pos
Brown front spring no2 piston 35w oil
Green rear spring no1 piston 25w oil
Front link setting 1 a no washers -1deg camber
Rear link 1 b no washers -1deg camber
0 deg antisquat
Medium wheelbase
Shock pos rear: no1 (inner) tower inner on arm
Shock pos front: 2 middle on tower inner on arm

Lipo forward pos.
Rear ballast weight (28g in front of gearbox)
7g in rear pockets
10g on servo

Im looking to get better steering, rear end feels good.
I need moore low and high speed steering.

One more ting: diff setting, i have always set my diff as loose as possible (without diff sliping), manual says thight to bottom and loosen 1/8 is the manual setting preferable from the way i use to set my diff?

Thanks