Set ups, can't help there as we tend to race on astro/carpet.
The batt spacers (2 x carbon strips) these can be bought from Xtreme (not included in kit)
Wing mounts- You can use Pred X11 wing mounts or Tamiya 511, poss Losi 22 ones but check the bolt spacing on these ones.
As for cut lines, there is a faint line on the shell but have a look on the 'Show me your Vega' thread for pics of the shells to get an idea
You'll also have to shave a 45 deg chamfer on the rear toe block to give the motor clearence (this was done on purpose to get the motor as close to the gearbox as poss) just takes 2 mins with a dremel or hobby knife.
|