Thread: 22 SCT Setup
View Single Post
  #6  
Old 21-09-2012
Bob_Zahn Bob_Zahn is offline
Member
 
Join Date: May 2008
Posts: 60
Default

Thanks for the additional suggestions. Helps confirm I'm on the right path

I had a lot of problems with tie rods popping off. I ended up replacing them with Traxxas tie rods and captured ball ends. Replaced rear links and front steering links.

As for setup I stayed with mini pins front and rear but I snipped 2 rows inside and out on front tires.

I started with 30 kick up and 0 degree caster blocks.
Front shocks 55 piston w/ 40 wt oil, 1mm limiter, black springs
Rear shocks 55 piston w/ 32.5 wt oil, 3mm limiter, pink springs

Front shocks inside on tower. Other mounting points are stock

Rear link is 1-B 2mm both sides
Front link 1-A 2mm inside
-1 camber front, -1.5 rear
1mm toe out
29mm ride height

The truck was starting to tip again in the main but still fairly quick. Jumped awesome and was very smooth overall

I'm running short lipo which I believe is part of my problem. I will be adding more weight to the chassis or may try the mid motor brass weight kit

Managed to TQ and win tonight

Thanks again for the setup help!!
__________________
Bob Zahn - TLR 22
http://rczahn.blogspot.com
Reply With Quote