- Itīs showtime - when the Torch is coming. Wide - bad and mercilessly are the characters of this truggy in 1:8 scale. The destructive tyres claws in to the ground like a plow. Even jumps are mastered by the torch as if every ramp is his territory.
TORCH Truggy Kit
- 4WD all-wheel drive
- Complete ball bearings
- 17mm aluminium big bore shock absorbers
- 3 differentials
- Steel main gear
- 3mm aluminium chassis plate with side guards
- 5mm aluminium shock towers
- CVD drive shafts at the front axle
-
Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Torch N optimal for each track.
-
-
-
Through the relative far forward tank, radio plate and engine position is the weight distribution in front of the truggy. Thereby you can control the Torch N better in jumps.
-
At the front axle built CVD shafts. The rear drive shafts are protected by mud guards against dirt an stone chips.
-
-
For perfect driving performance you need suspension arms which resists all. That is why the Torch N has all the plastic parts from the competition truggy T8T.
- Fully adjustable suspension with right-left hand thread
- Mud guards at the rear axle
- Fibre-reinforced high-quality plastic parts from the T8T
- Adjustable wheelbase
- Aluminium steering rack
- Swaybars at the front and rear axle
- Fuel tank with 150ml capacity
- Pre-printed body
- Length: 590mm
- Width: 430mm
- Heigth: 220mm
Available now through your local hobby store. Visit
www.s-m-d.co.uk
Also Available In RTR Form
Torch N 4WD Nitro RTR
Equipment:
- 3.5 ccm race engine "F349" with 1.4 KW / 1.9 HP and 33.000 RPM
- Race exhaust system
- 2.4 GHz 2 channel radio control CR2S
- 3 channel receiver
- 9 Kg steering servo with metal gear S90MH
- 4 Kg throttle/brake servo
