There are lots of US style clay setups here:
http://www.teamassociated.com/cars_a...anuals_setups/
TBH, most setups are similar, with the exception being the springs, pistons and oil weights. The worlds car kit springs, brown front, green rears are fine.
At the oople, I ran the worlds car, pretty much as the manual, except I had a shaved rear U brace, and C hubs. I also found that removing the 2deg anti-squat helped with traction and rear grip. The car jumped spot on, but I had way too much front end steering.
Changes for this race... i'll be removing the brass bulkhead and some of the additional chassis weight to the front I run normally on my B4.1 when on astro.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2
-------------------------------------------------------------------------------------------------------------------
10electric |
Batley Buggy Club |
YORCC |
RHR |
MB Models
---------------------------------------------------------------------------------------------------------------