[Dean Washington]

Losi 22 - Original TLR 22 not a RTR, fitted with akula speartooth kit,Original Instructions included

Fitted on the Front =

• Losi Brass front kickup shim
• Atomic Carbon Front shock tower - super glued sides - minimal if any damage - 5/6 mm thick
• Losi Aluminum Servo bulkhead/mount
• Losi Front King Pin Titanium Nitride, Threaded
• Losi Aluminum Steering Rack

Fitted on the Rear =

• Losi Rear Outer Threaded Hinge Pin
• Losi Aluminum HRC 4 Degree Toe Plate
• Losi Mid Motor Camber Block - (plastic part lets the car down)
• Losi Titanium Ball Studs on the rear to limit any breakages
• Losi Aluminium Rear Hex Adaptor - .75 width - (keeps the rear end in check)
• Cream Rear weight
• Losi Ball Diff fitted

Fitted throughout the car:

• Brand new stainless screw set just gone in - never seen the track - no rust
• Losi Titanium Shock Standoffs - front and rear
• Lunsford Punisher Titanium Turnbuckles
• Atomic Carbon Blue Shims and Nuts - fitted throughout rather then the plastic ones
• Nick Gurnell Tapered pisons fitted in the big bores
• Cut bladders inside the shocks to provide 0 rebound (include a BNIP set of bladders if you like rebound)
• Low-friction O-Rings

Springs:

• Blue Front Springs Fitted
• Yellow Rear Springs Fitted
• White Rear Springs
• Pink Rear Springs
• Red Front Springs
• Black Front Springs
• Green Front springs

Custom Shell in good condition and looks pretty neat with yellow wheels and aerial, wings is knackered but fine for practice - will include a new wing in packet.



All parts included to convert back to rear motor

Spares

• 2 spur gears
• TLR5089 - Bladder - BNIP
• Pair of Front Wishbones
• Pair of Rear Wishbones
• 3x Rear Hubs
• 3x Front Steering Arms
• 4x Caster Blocks
• Front Bulkhead
• Mid-motor Brace
• Battery tray x2
• Rear hingepins x 3 (1 threaded with two nuts - 2 standard)
• Servo Mount / Bulkhead
• Plastic kickup shims
• 2 x Front Shock Shafts (TiNitrade)
• Losi 22 Rear Weight
• Losi Plastic Bleader Shock Caps
• Shock O-Rings
• Plastic Ball Cups
• All the Losi Shock Pistons
• Anti-Squat Set for LRC and HRC
• 4 degreee LRC rear plate
• 5 degree HRC rear plate BNIP
• Servo mounts and shims
• New Wing BNIP
• Plastic Drive Hexes
• Original Chassis with sidepods
• 7 sets of rear wheels, one with newish schumacher yellow other used ballistics
• 8 sets of front wheels one with newish yellow slim cut staggers other with stagger ribs
• under lipo weight

Will include any other parts that I may not have mentioned. The gearbox is now super-smooth. Electronics not included £ delivered ono