[Darren Boyle]

Originally Posted by diggsRC

I had the same problem. I use the TLR22 shocks and every time I landed from a big jump the drive shaft would pop out. The X6 loves droop so I decided to keep the full droop and shim the shaft into the drive cup with 2 of the drive shaft shims on each side. I had to shave some material off of the outer wheel spacer, in order to get the pin through, and some off the A-Arm to allow the driveshaft to clear but it works like a charm. I've had several hours running with it like this and had no problems. The full shock length I use is 97mm. Check the pics below to see what I mean.

Personally, I would say that the car pictured has quite a bit too much droop, the car does like droop yes, but that is a bit excessive...

Chippy, yes the XF5661 axles do include the spacers with them