All these parts are now in stock:
TRF502X Rear shock tower high wing mount
(5 mm up) in 4 mm carbon 660: 18 euros
TRF502X Rear shock tower high wing mount
(5 mm up) in 3.5 mm carbon: 18 euros
TRF502X Rear shock tower in 4 mm carbon 660: 18 euros
TRF502X Rear shock tower in 3.5 carbon (already in stock): 18 euros
TRF502X Front shock tower in 4 mm carbon 660: 15 euros
TRF502X Front shock tower in 3.5 mm carbon (already in stock): 15 euros
TRF511 Front shock tower in 4 mm carbon 660: 15 euros
(NOTE! New design with 3 holes. Original outer hole removed)
TRF511 Front shock tower in 3.5 mm carbon: 15 euros
(NOTE! New design with 3 holes. Original outer hole removed)
TRF511 Rear shock tower in 4 mm carbon 660: 18 euros
(NOTE! New design. Original outer hole removed. Additional inner holes)
TRF511 Rear shock tower in 3.5 mm carbon: 18 euros
(NOTE! New design. Original outer hole removed. Additional inner holes)
TRF511 LiPo_carbon tray with carbon middle piece and stainless steel center weights: 25 euros
(2 stainless steel weights (17 and 26 grams) are included. So you can add 17, 26 or 43 grams.)
Some additional info about TRF511 shock towers:
The changes that I´ve done makes towers stronger than original parts.
- More material around shock mounting holes and tower mounting holes (on the outside).
- Removed the outer shock mounting holes on both front and rear tower.
- On rear tower I´ve added additional inner holes (Shown in green below).
- The unused lower holes at rear tower are removed.
- Made the openings smaller.
Sketch below show some of the most important modifications that I´ve done.
Red parts are removed (original design). Green are new.
Now shown are previous thickness around mounting holes.
Proto parts:
