just looking at the spec of the ESC and it says
Input Voltage.......4-6cells NiMH/NiCAD (1.2Volts DC/cell)
........................2cells Lipo (3.7Volts DC/cell)
.....minimum input 4.8V maximum input 7.4V
That rules out the 1s lipo then, and probably why a lot of people with the mardave in the club had problems and ended up buying a new ESC.
Although looking positive for the battery now, i used the novak discharger to take it to 0v and then charging it peaked at 350, but now seems to be fine, currently at 3400Mah so may have rescued it, just need to cycle it again to make sure.
|