Hi all
FrSky module all fitted in to the 3GR and bound up and installed in the 410.
If i had thought about it i would have taken pics of the interior install but just wanted to the job done.
1st pic up, the bind button and led on the tranny:
[IMG]
[/IMG]
..and here's the install in the Durango, loving the receiver, so small.:
[IMG]
[/IMG]
How I did do it though, was I slid the 40 meg board out of the way, undid the aerial, undid the tiny cross head screw that is sort of behind the "Futaba 3GR" shiny badge on the front and trimmed off the bit of plastic is was holding down, only down to where it gets wider. Also hacked off the nobble the screw threads into. this made room for the binding button and led board.
The aerial mound was done by dremmelling down the nob where the aerial comes out, making it flush with the top, hopefully you can see this from the pic, this gave enough thread to do up the brass mount and do the folding aerial up nice and tight.
The hack module simply sits behind the 40 meg board as there is ample room, oh, and the wires were soldered on. Result.
All works, will be testing trackside soon, although judging by reports from others on here, there's nowt to worry about.