AFAIK there are standards and HD's, which are the upgrade.
I was running HD's on everything, and they still pop
So i swapped to an alternative, that doesn't pop, at all. (So far)
There is a list on here for the RPM/Team Associated update for the 410, and i've worked out parts for the parallel 210 update.
Edit:- Had the 410 parts list on my email, and this works.......
Parts needed:
RPM73392 RPM Long Shank Rod Ends (1 pack = 12 pieces, better get 2 packs)
ASC31288 Ti Nitride Ballstuds M3x5, Short (1 pack)
ASC31289 Ti Nitride Ballstuds M3x8, Short (2 packs)
ASC31292 Ti Nitride Ballstuds M3x8,Long (2 packs)
ASC31290 Ti Nitride Ballstuds M3x10, Short (1 pack)
The fitment would be:
Front Caster Link Outer 5mm Short
Front Caster Link Inner (on Tower) 10mm Short with M3 nylock nut
Steering link outer 8mm Long with M3 nylock nut
Steering link inner 8mm Short with M3 nylock nut Rear link outer 8mm Long with M3 nylock nut
Rear link inner 8mm Short with M3 nylock nut