Quote:
Originally Posted by YoungChazz
The Losi ball cups are also a good option, and should fit all the above turnbuckles.
|
I hate to add confusion but the above sentence is wrong: Losi ballcups are significantly longer than AE/JConcepts/RPM, and to use them you need shorter turnbuckles.
To try and be clear: the same ballstuds will work for all of the below.
You can use 4x 2" turnbuckles (camberlinks), and 2x 2.125" (tie-rods), and any of the Associated, JConcepts, or RPM ballcups (probably others as well, but those are the main 3 people use). This is the set-up that comes in the K021 entire car.
OR
You can use 4x 1.75" turnbuckles (camberlinks) and 2x 1.875" (tie-rods), and Losi ballcups.
Finally, if you're running the E-Speed camberlink hangers you'll want shorter rear turnbuckles, but I'm not sure on the distance as I've not run the E-Speed pieces in quite a long time here in the states.