In pictures…That's mine…
There is a long time I have to do it…re-furbushing my BX with my personal « touch »…
We can not see it but Motor and batteries are forward about 7 mm…chassis, top deck ( Thx Fiberlite ) and belts ( Thx BANDO ) have change for more steering and traction.
Sometime we are « fashion victim »…but sometime it is really necessary…BX « Bigbored »
Use of « BX World » camber link support with additional point location to make the camber link longer to get more « front traction » and steering at low speed.
Speedo ( RS Pro ) and receiver on a same side ( for well balance R/L ) on carbon plate…the access to pinion is more complicated…so…leave two screws and you have a complete access to adjust the pinion & spur .
As the Lipo are lighter…two brass plate ( 1,5 mm thickness ) are inserted under each for the circonstancy => 50gr more for each saddle.
Rear Shock support « Special Bradders » with intermediate point location to adjust the rear grip perfectly…
Uploaded with
ImageShack.us