Quote:
Originally Posted by Welshy40
Will do once ones been made to suit the longer shaft. Besides if it sat correctly the gear would still hit it if marshalled etc so to make it better the gear does need to be moved in more. Still mate, this has made a significant difference, more than I would have evern thought and even with these issues it was brilliant!!!!  |
ok welshy i will tweak the design a bit, i will bring the spur side inside by 1mm and lengthen the thread area without adding length to the shaft, so that you can tighten more. i see that you might have a problem with the gear cover becuase you are using the standard motor plate which is thin. On my ZX i am using the GPM finned motor plate which is 2 times thicker so it pushes the gearcover a little outwards. perhaps you can temporarily space the gearcover out by adding washers inside the screws. or you could find a machine shop nearby and just cut off 1mm from the spur side so that the gear will go in. i am glad that its giving the lazer an edge.