Quote:
Originally Posted by mikejwright
Thanks for the advice mikeyscott. Well my 410R is almost built now, just need to build the shocks and then I'll have a rolling chassis.
Just ordered a Tekin Redline 7.5 and a 23t pinion. Will this combination be ok for the track?
I've also ordering schumacher yellow mini spike tyres, hope these will be ok for the astro.
Still deciding on what tx.rx system to go for, I'd like a stick set but with a micro receiver, and I cant find any brand that does that!
So hopefully in a couple of weeks I can come down to the track and slowly get back into it again.
|
Hi Mike,
Pinion choice will work, I used a 22t with a 7.5 motor with 0 degrees of timing.
Tyres are a good choice for dry weather running, would advise trimming off at least the inner and outer row on the front. I ran cut staggers on the front for consistancy, but the track grip levels are forever changing and will continue to do so untill it settles down, and I cannot tell you when that will be.
I have only ran a wheel tx but I do know that the Spektrum DSM2 SR3520 with the LRP SXX esc fit onto radio tray perfectly. If you get a module tx at least you can change it to Spektrum module and run that rx. Im sure Simon at RC Lazy was selling a micro reciever that ran on the Futaba system, dont know the name or costs etc but if you give him a call I'm sure he will sort you out, or any of the LMS.
Any thing I can help you with just ask and I will be happy to give you any advise I can.